BluEdge LCD 2.4-inch full-colour RS485 BMS display

$169.00

BluEdge LCD 2.4-inch full-colour RS485 BMS display

The AMPTRON® BluEdge colour display with built-in audible alarm, connects to any Amptron BluEdge Battery bank to present key battery system status & data. This information includes SOC, Battery Voltage, Current draw in Amps & Watts, Battery Temperature, Battery used cycles etc. The display also supports presenting consolidated data of a parallel connected battery bank for models that support parallel communication.

Purchase Below OR
Find Your Nearest Reseller

 

 

Quick and easy setup to display key battery information such as State of Charge (both % and Ah), Voltage, Current draw, Temperature, Cycles etc.

Suitable for compliance with AS/NZS 3001.2:2022 and AS/NZS 3004.2:2014 standards.

Built-in audible alarm that will trigger on adverse battery conditions prior to battery shut-down.

Conveniently view battery alarm codes.

View consolidated battery information for a bank / group of connected BluEdge batteries in one convenient display (for models that supports parallel communication). For the 24V, 36V and 48V batteries – dive down into cell voltage data for each connected battery in the group.

Easy fixing with flexible flush mounted design and range extendable via common UTP network cables. *** Please note, the display unit requires a compatible communications adapter cable to connect to a battery. Refer to the table below for the compatible cable for each battery model.

Battery model Communication cable adapter required for display Parallel communication supported?
AT-LFP-12-100-BTC-BV10 AT-BE-CAN-RS485-COMM-BV01 Yes, up to 4 batteries
AT-LFP-12-200-BTC-BV10 AT-BE-CAN-RS485-COMM-BV01 Yes, up to 4 batteries
AT-LFP-12-200-BTC-DV10 AT-BE-CAN-RS485-COMM-AV01 No
AT-LFP-12-400-BTC-BV10 AT-BE-CAN-RS485-COMM-BV01 Yes, up to 4 batteries
AT-LFP-12-400-BTC-DV10 AT-BE-CAN-RS485-COMM-BV01 No
AT-LFP-24-100-BTC-BV10 AT-BE-CAN-RS485-COMM-BV01 Yes, up to 16 batteries
AT-LFP-24-200-BTC-BV10 AT-BE-CAN-RS485-COMM-BV01 Yes, up to 16 batteries
AT-LFP-36-100-BTC-AV10 AT-BE-CAN-RS485-COMM-BV01 Yes, up to 16 batteries
AT-LFP-48-100-BTC-AV10 AT-BE-CAN-RS485-COMM-BV01 Yes, up to 16 batteries

Product Description

​Preset capacity value

0.1Ah to 999Ah

Item
Specification
Description/Remark
Model
AT-BMSMON-2.4-COL-RS485-AV01
BluEdge LCD 2.4-inch full-colour RS485 BMS display
Display Full Colour LCD
Interface Comms Cable
RS485
​Weight
20g
Size
​100*70*15mm
Protection Category
IP55
Not suitable for outdoor use

BluEdge Battery Display – User Manual
BluEdge Battery Display – Communication cables mapping

Monitor Warranty Policy

You may also like…